5. Scribe a line (A) across the link and windshield
wiper linkage to show the original adjustment.
Separate the windshield wiper linkage (B) from the
wiper motor (C).
6. Install the motor in the reverse order of removal,
and note these items:
• Grease the moving parts.
• Before reinstalling the wiper arms, turn the wiper
switch ON, then OFF to return the wiper shafts to
the park position.
• If necessary, replace any damaged clips.
• Check the wiper motor operation.
Washer M o t o r Test
1. Remove the left inner fender (see page 20-167).
2. Disconnect the connector from the washer motor.
3. Test the washer motor by connecting battery
power and ground according to the table.
• If the motor fails to run smoothly, replace it.
• If the motor runs smoothly, but little or no
washer fluid is pumped, check for a disconnected
or blocked washer hose, or a clogged pump
outlet in the motor.
\
T e r m i n a l
B a t t e r y
\
1
2
C o n n e c t e d
e
0
22-189