Gauges
Gauge Assembly Replacement
1. Remove the instrument panel (see page 20-84).
2. Remove the screws (A) from the gauge assembly
(B), and spread a protective cloth (C) on the upper
column cover.
3. Disconnect the connectors (D), and remove the
gauge assembly.
4. Install in the reverse order of removal.
V S S Replacement (M/T)
1. Disconnect the 3P connector (A) from the V S S
(vehicle speed sensor) (B).
C
2. Remove the mounting bolt (C), then remove the
V S S .
3. Install in the reverse order of removal.
22-68