Power Saver Mode; Switching To Power Saver Mode; Recovering From The Power Saver Mode - Konica Minolta bizhub C3100i Quick Manual

3.5

Power Saver Mode

3.5 Power Saver Mode
The machine is equipped with power saving features that reduce electric power consumption volume to con-
serve electricity.
Power saving features include Low Power Mode and Sleep Mode.
Sleep Mode reduces electric power consumption even more than Low Power Mode, but requires a longer
recovery period than Low Power Mode.
3.5.1

Switching to Power Saver Mode

The machine enters Power Saver mode in the following cases. In Power Saver mode, the
ply / Power Saver) button blinks.
- Press the
- When the machine has not been operated, no jobs have been executed, and no print data has been
received until it is time for the machine to enter Power Saver Mode
Tips
The machine will not enter Power Saver Mode while an error message is displayed for paper jams, consum-
ables replacement, etc.
d
Reference
For details on how to change the interval until the machine enters Power Saver Mode, refer to page 3-24.
3.5.2

Recovering From the Power Saver Mode

The machine recovers from Power Saver Mode with the following procedure or state.
- When the
- When the machine receive jobs
Tips
- When you press the
off, or when the machine has not completely entered Power Saver mode, leaving Power Saver mode
may take some time. Wait until the machine accepts the operation releasing it from Power Saver mode,
then press the
- When jobs are executed in Power Saver Mode, it sometimes switches to Power Saver Mode earlier than
specified by the settings.
bizhub C3100i
(Power Supply / Power Saver) button, and select [Power Saver On]
(Power Supply / Power Saver) button is pressed
(Power Supply / Power Saver) button immediately after the display turns
(Power Supply / Power Saver) button again.
3
(Power Sup-
3-23