The Intelligent Function Module Interrupt Pointer Setting - Mitsubishi QJ71C24/-R2 User Manual

4 SETTINGS AND PROCEDURES PRIOR TO OPERATION

4.5.3 The Intelligent function module interrupt pointer setting

4 - 20
The following explains the interrupt pointer setting with GX Developer in order to
receive data using an interrupt program.
For the method to receive data using an interrupt program, see User's Manual
(Applications) Chapter 4.
[Setting purpose]
The intelligent function module interrupt pointer sets the information to read the
receive data with an interrupt program of the PLC CPU during communication
using the non procedural/bidirectional protocol.
By performing this setting, an interrupt program starts when data is received from
an external communicating device and the reading of data received by the PLC
CPU becomes possible.
[Startup procedure]
[PLC parameters]
For display screen, see the GX Developer Operating Manual.
[Setting screen]
[Setting description]
(1) Interrupt pointer start No. on the PLC side
Set the start number (ranging from 50 to 255) of the interrupt pointer (Ixx) for
use in the sequence program.
(2) Interrupt pointer No. of units on the PLC side
Set the number of units (2) of interrupt pointers (I) for use in the sequence
program.
[PLC system setting]
MELSEC-Q
Interrupt pointer setting .
4 - 20