Switch Setting Of Intelligent Function Module - Mitsubishi MELSEC-Q Series User Manual

4 PREPARATORY PROCEDURES FOR DATA LINK

4.4 Switch Setting of Intelligent Function Module

4 - 6
The switch setting of the intelligent function module is performed in "I/O assignment
settings" of GX Developer.
(1) Setting Item
Switches 1 through 5 are provided for the intelligent function module and 16-bit
data are used for the settings. When the intelligent function module switch
setting is not set, the default for Switch 1 is 0.
Last station
Switch 1
number setting
Switch 2
Switch 3
Switch 4
Switch 5
POINT
Do not set Switch 2 through 5. If any setting is made, normal operation may be
affected.
Setting item
Set the last number of the stations that execute data link.
This setting disables data link processing for non-connected
stations, reducing link refresh time. (See Sec.3.5) When the
last number exceeds the number of connectable stations
(see Sec.3.4.2), the setting is ignored.
<Setting range>
1 to 64
When 0 or greater than 65 is set, data link will be executed within
the range of connectable station numbers.
No setting (blank)
No setting (blank)
No setting (blank)
No setting (blank)
MELSEC-Q
4 - 6