8 UTILITY PACKAGE (GX Configurator-SC)
8.6 Monitor/Test
8 - 32
[Purpose]
The displayed menu screen is used to perform various operations, including the
monitoring of the Q series C24's operating status and setting values and the
testing of its output signals. The monitor/test operations can be performed only
via online operation.
[Startup procedure]
Startup from Intelligent function module utility
(GX Developer Version 4 or later)
[Online]
[Monitor/test]
[Monitor] screen
Startup from the system monitor (GX Developer Version 6 or later).
[GX Developer]
C24 by installation status"
[Monitor/test screen]
[Monitor/test items]
The following selection menus for monitor/test operation will be displayed.
ERR. occurrence
ERR. clear request
(Communication error information, error code information)
X · Y monitor/test
Modem function monitor/test
Transmission control and others monitor/test
MC protocol monitor
Non procedure monitor/test
Bidirectional monitor
PLC CPU monitoring monitor
Transmission user frame No. designation monitor
Monitor/test others
System setting default, system setting write
Flash ROM write allow/prohibit designation
"Select monitor/Test module"
[Diagnostics]
[System Monitor]
Diagnostics...
Function
MELSEC-Q
Monitor/test
"Select the Q series
[Monitor] screen
Reference section containing
explanation
Section 8.6.10
Section 8.6.1
Section 8.6.2
Section 8.6.3
Section 8.6.4
Section 8.6.5
Section 8.6.6
Section 8.6.7
Section 8.6.8
Section 8.6.9
Section 8.4.11
Section 8.4.12
8 - 32