Mitsubishi QJ71C24/-R2 User Manual page 298

APPENDIX
Screen
(System
setting/monitor)
Accumulated count of unlock process normal completion
Accumulated count of unlock process abnormal
completion
Accumulated count of lock process based on circuit
disconnect
Modem function
Callback permit accumulated count
monitor/test
Callback denial accumulated count
Auto (callback) connection permit accumulated count
Auto (callback) connection denial accumulated count
Accumulated count of callback receive procedure cancel
Circuit disconnect wait time (PLC CPU watch use)
Remote password mismatch notification count
designation
Remote password mismatch notification accumulated
Modem
count designation
function
system Auto modem initialization designation
setting
Callback function designation
Callback denial notification accumulated count
designation
Data No. for callback designation 1 to 10
Transmission
control and other RS-232 control signal status CS (CTS)
monitoring/tests
RTS (RS) designation
DTR (ER) designation
Transmission control start free area
Transmission control end free area
Transmission
control and Send/Recv data monitoring designation
other system
Action for buffer full
settings
Stop by Timer 0 error
Monitor buffer head address
Monitor buffer size
Transmission transparent code designation (2nd to 10th)
Non procedure User frame receive format designation (1st to 4th)
system setting
Exclusive format-1 received data count (1st to 4th)
Non procedure
Timeout at No-protocol
monitor/test
Station. No. (Instruction setting)
Monitor/test others
Communication error clear request for CH and to turn
LED off
Accumulated count of unlock process normal completion
Auto refresh Accumulated count of unlock process normal completion
setting
Accumulated count of lock process based on circuit
disconnect
App. - 4
(2) List of added setting items for GX Configurator-SC
The following table lists the setting items added to the GX Configurator-SC due to
a software version upgrade.
Additional setting item
POINT
(1) GX Configurator-SC SW0D5C-QSCU-E 20C or later supports the Q series
C24 of function version B.
(2) See Section 2.6 of this manual for how to check the software version of GX
Configurator-SC.
GX Configurator-SC
Software version
SW0D5C-QSCU-E
Version Version Version
2.06G 2.00A 1.10L
: Setting possible
MELSEC-Q
Reference
section
40E,
10B,
30D,
00A
20C
Section
8.4.4
Section
8.6.2
Section
8.4.5
Section
8.6.3
Section
8.4.7
Section
8.6.5
Section
8.6.9
Section
8.6.9
Section
8.6.10
Section
4.6
: Setting impossible
App. - 4