Performing Common Utility Operations - Mitsubishi QJ71C24/-R2 User Manual

8 UTILITY PACKAGE (GX Configurator-SC)

8.3.3 Performing common utility operations

Name of key
Esc
Tab
Ctrl
Delete
Back
space
Page
up
Page
Down
Enter
8 - 13
This section explains how to perform the common operations in the data setting, auto
refresh setting and monitor/test screens.
(1) Available Control Keys
The following table lists the special keys that can be used during operation of
utility and their applications:
Cancels a newly entered value when entering data in a cell.
Closes the window.
Moves between the controls in the window.
Used in conjunction with the mouse to select multiple cells in the selection test.
When a cell is selected, clears all set data.
Deletes the character where the cursor is positioned.
Moves the cursor.
Moves the cursor one page up.
Moves the cursor one page down.
Confirms the value entered in the cell.
(2) Operation Command Buttons
Current value display
Make text file
Start monitor
Stop monitor
Execute test
Write to module
Read from module
Application
: Displays the current value of the selected item.
: Creates a text file (TXT format) under the specified
file name and saves to it the contents currently
displayed on the screen.
: Starts monitoring of the current value field.
: Stops monitoring of the current value field.
: Registers the system setting data of the selected
item in the flash ROM.
To apply Execute test to multiple items
simultaneously, set the data for the corresponding
items, select the multiple items while pressing down
Ctrl , then click Execute test .
1 The settings for "receive data clear request"
and "flash ROM write allow/prohibit
designation" are written to the buffer memory.
: Registers all system setting data for the Q series
C24 in the flash ROM.
: Reads all system setting data for the Q series C24
from the flash ROM.
MELSEC-Q
1
8 - 13