Mitsubishi QJ71C24/-R2 User Manual page 46

2 SYSTEM CONFIGURATION AND AVAILABLE FUNCTIONS
Dedicated instruction
FROM, TO
ONDEMAND
INPUT
OUTPUT
BIDIN
BIDOUT
SPBUSY
CSET (Receive data clear)
BUFRCVS
PRR
CSET (Initial setting)
CSET (PLC CPU monitoring
function)
PUTE
GETE
UINI
2 - 10
3 The dedicated instructions are unavailable for the MELSECNET/H remote I/O
station.
For the functions that use the dedicated instructions to make communication,
perform programming by the following methods.
Perform programming using the REMFR/REMTO instruction.
Perform programming using the REMFR/REMTO instruction
and I/O signal.
No method
Perform programming using the receive data clear request
area of the buffer memory.
No method
(Data cannot be received using an interrupt program)
Perform programming using the REMFR/REMTO instruction
and I/O signal.
No method
(Register/delete the PLC CPU using the MC protocol or GX
Configurator-SC.)
Perform programming using the REMFR/REMTO instruction
and I/O signal.
Perform programming using the REMFR/REMTO instructions
and I/O signals. (However, the station No. cannot be changed.)
4 Available for the MELSECNET/H remote I/O station of function version D or
later.
GX Developer Version 8.18U or later is required to use the function.
Method
MELSEC-Q
Explanation section
Appendix 9.2
Appendix 9.3
Appendix 9.4
Appendix 9.5
Appendix 9.4
Appendix 9.5
Appendix 9.6
Appendix 9.7
Appendix 9.8
Appendix 9.9
Appendix 9.11
Appendix 9.10
Appendix 9.12
2 - 10