Dme Wipe Snapshots; Dme Wipe Snapshot Operations With The Menus; Dme Wipe Pattern Operations In The Flexi Pad; Recalling A Dme Wipe Snapshot - Sony MVS-3000 System User Manual

To set the operation for DME wipe crop transition
execution
1
In the <Crop Mode> group of the Key1 DME Wipe
Adjust menu, press [Crop], turning it on.
2
In the <Crop Mode> group, press [Crop] or [4:3 Crop]
(to crop from 16:9 to 4:3 aspect ratio), turning it on.
3
In the <Crop Mode> group, press [Remove From
Begin].
The Remove From Begin menu (1116.7) appears.
For subsequent operations, see step 4 in
action when a DME wipe crop transition is executed"
(1 p. 96).
To set the timing of transition completion
1
In the <Crop Mode> group of the Key1 DME Wipe
Adjust menu, press [Crop], turning it on.
2
In the <Crop Mode> group, press [Remove From
Begin].
The Remove From Begin menu (1116.7) appears.
For subsequent operations, see step 3 in
timing of transition completion" (1 p.
Applying a border to a DME wipe
In the <Edge> group of the Key1 DME Wipe Adjust menu,
press [Border], turning it on.
For subsequent operations, use the same process as in step
3 in
"Modifying the DME wipe pattern edge" (1 p.
Specifying DME wipe direction
For details about the corresponding pattern number,
1 "DME Wipe Pattern Variations and Modifiers"
(p. 94).
Select one of the following in the <Direction> group of the
DME Wipe Adjust menu for Key1.
Normal: Wipes in the normal direction.
Normal/Reverse: Switches between normal and reverse
for each transition.
Reverse: Wipes in the opposite direction to normal.

DME Wipe Snapshots

You can snapshot and save a DME wipe pattern together
with the current settings of its modifiers and pattern limit
in a dedicated register for recall when required.
There are 10 DME wipe snapshot registers for each of the
switcher banks.
Saving to and recalling these registers can be performed
using the Flexi Pad or a menu operation.
For details about Flexi Pad operations,
Pattern Operations in the Flexi Pad" (p.
DME Wipe Snapshot Operations
with the Menus
You can save, recall, and delete in the same way as for
wipe snapshots.
For details about the method of operation,
"To set the
Snapshot Operations with the Menus" (p.
DME Wipe Pattern
Operations in the Flexi
Pad

Recalling a DME Wipe Snapshot

"To set the
97).
The operation of recalling a DME wipe snapshot in the
Flexi Pad is the same as the operation of recalling a wipe
snapshot
button to select DME wipe snapshot mode.
You can change the indications for buttons [0] to [9] in the
memory recall section to pattern images, using the
95).
Engineering Setup >Panel >Operation >Flexi Pad Mode
menu (7326.3).

Selecting the DME Wipe Pattern

The operation of selecting the DME wipe pattern in the
Flexi Pad is the same as the operation of selecting a wipe
pattern (1 p.
button to select DME wipe snapshot mode.
DME Wipe Snapshots / DME Wipe Pattern Operations in the Flexi Pad
(1 p. 90), except for pressing the [DME WIPE]
90), except for pressing the [DME WIPE]
1 "DME Wipe
99).
1 "Wipe
89).
99