Regarding frame memory, it is possible to capture image
data stored in an external device into frame memory. You
can also convert the format of image data in frame memory
into a different format and save it in an external device.
For details, see
Chapter 15 "Files" (1 p.
Setup
Various settings are required, in order to operate the
switcher, control panel, external devices, and so on,
connected together in a single system.
This is referred to as "setup," and you can carry out the
setup operations from the Engineering Setup menu. The
settings are grouped under the following headings.
System setup (System)
For details, see
Chapter 16 "System Setup" (1 p.
Panel setup (Panel)
For details, see
Chapter 17 "Control Panel Setup"
(1 p.
219).
Switcher setup (Switcher)
For details, see
Chapter 18 "Switcher Setup" (1 p.
Router/tally setup (Router/Tally)
For details, see
Chapter 19 "Router Interface and Tally
Setup" (1 p.
257).
User setup (User Setup)
For details, see
Chapter 20 "User Setup" (1 p.
18
Setup
200).
211).
240).
261).