Wipe Modify Clear; Wipe Settings For Independent Key Transitions - Sony MVS-3000 System User Manual

Aspect Off
1
Open the M/E-1 >Wipe >Main Modify menu (1155).
2
Press [Aspect], turning it on.
3
Set the following parameter.
No. Parameter Adjustment
1 Aspect Aspect ratio
• Negative values expand
• Positive values expand
Replicating the wipe pattern
(Multiplication)
The same pattern can be repeated horizontally and
vertically or both, up to 63 times.
Multi Off
The [Invert Type] parameter allows you to select one of the
following four replication layouts.
1: All replications in the same orientation
2: Even-numbered rows staggered
3: Even-numbered columns and rows inverted
4: Even-numbered columns and rows inverted, and even-
numbered rows staggered
1
Open the M/E-1 >Wipe >Main Modify menu (1155).
2
Press [Multi], turning it on.
3
Set the following parameters.
Aspect On
vertically.
horizontally.
Multi On
No. Parameter Adjustment
1 H Multi Number of repetitions of pattern
horizontally
2 V Multi Number of repetitions of pattern
vertically
3 Invert Type Replication layout
Possible combinations of wipe patterns
and modifiers
Modifier Wipe pattern (pattern number)
Available
Direction 1 to 24
Edge 1 to 24
Positioner
17, 18, 21 to 24
Rotation 1 to 24
Aspect ratio
9 to 16, 19 to 24
Multiplication 1 to 24

Wipe Modify Clear

Press [Default Recall] at the lower left of the menu screen,
turning it on, then press the [Wipe] VF5 button to return
the wipe settings to their initial status.
For details about initial status,
Settings" (p. 214).
Wipe Settings for
Independent Key
Transitions
You carry out independent key transition wipe setting
operations using the Wipe Adjust menu for each keyer.
This section describes an example using key 1 on the M/E-
1 bank.
Open the M/E-1 >Key1 >Transition menu (1116), select
[Wipe Adjust], and display the Key1 Wipe Adjust menu
(1116.1).
For an overview of independent key transitions,
1 "Independent Key Transitions" (p.

Wipe Settings for Independent Key Transitions

Not available
–
–
1 to 16, 19, 20
–
1 to 8, 17, 18
–
1 "Saving User-Defined
57).
87