Sony MVS-3000 System User Manual page 43

Rear panel
a UTIL (utility) connector (RJ-45 compliant)
Intended for future expansion.
b MVS (multi format video switcher) connector (RJ-
45 compliant)
Connect to the MVS-3000. You can also connect to the
switcher processor via an Ethernet switch.
c DEVICE 1 to 4 connectors (USB 2.0 compliant,
USB Type-A)
1)
Connect to a USB device.
d DVI-D connector
Connect to an external monitor.
e U (signal ground) terminal
Connect to the system ground.
f - AC IN (AC power input) A and B connectors
(3-pin)
Connect to 100 V to 240 V AC power supply with the
optional AC power cords.
The unit is equipped with two power supplies. When A or
B power supply is connected, unit operation can proceed.
1) For information about devices that can be connected, contact your Sony
representative.
d DVI-D connector
c DEVICE 1 to 4 connectors
b MVS connector
a UTIL connector
1)
1)
f -AC IN A and B connectors
e U terminal
Power Supply and Connectors
43