Sony MVS-3000 System User Manual page 187

• When the recalled register and the register selected
in the menu are different.
• When a device other than [Register] is selected
([Local Disk] or [Removable Disk]) in the File
>Shotbox, Macro >Macro >File Edit menu.
• If the recalled register is locked.
On Line Edit menu
6 ALL button
5 Macro register listing
1 Register number
2 Register name
3 Event number
q; Delete button
9 Insert After button
8 Insert Before button
7 Macro creation event list
a Register number
Shows the number of the register (1 to 250) being edited.
b Register name
Shows the name of the register being edited.
c Event number
Shows the current event number. When the [FROM TO]
button in the Flexi Pad is pressed to select a range of
events, this appears as a range, "From X To Y."
The event number reflects the position of the cursor in the
macro register listing.
d Remaining Memory
Shows the percentage of memory still available for
recording events.
4 Remaining
Memory
qd >Next button
qs <Prev button
qa Modify button
e Macro register listing
When a macro is stored in the register, this shows a list of
the macro events. Each macro event consists of the
following components, which you can check in the list.
• Contents: Identifies this as an Event statement,
Continue statement, or event number
• Symbol: Type of event (ASCII character string)
• Data: Event details in the form of parameters and data
For details about the event components,
Editing Rules" (p. 289).
The cursor shows the current event in the list, in reverse
video. You can use the [No] parameter to scroll the list,
without changing the cursor position.
Depending on the switcher status, the cursor color changes
as follows.
• Yellow: Macro editing mode
• Gray: When the editing mode is exited by a control
panel operation
• Blue: During macro execution
f ALL button
Selects all events in the macro register listing.
g Macro creation event list
Shows the event being created or executed in the control
panel.
h Insert Before button
Inserts a created event immediately before the selected
event in the macro register listing.
i Insert After button
Inserts a created event immediately after the selected event
in the macro register listing.
j Delete button
Deletes the selected event in the macro register listing.
k Modify button
Replaces the selected event in the macro register listing
with a created event.
l <Prev button
Moves the cursor to the event immediately before the
selected event in the macro register listing.
m >Next button
Moves the cursor to the event immediately after the
selected event in the macro register listing.
1 "Macro File
187
Editing Macros using Menus