Sony MVS-3000 System User Manual page 308

Icon Message
Rename operation failed (-52).
Rename operation failed (-53).
Invalid FM OutCh (–6).
Specified FM OutCh was locked (–7).
Restore failed, some Clip files cannot
be deleted on this board (–8).
Not enough free register area for
Backup or Restore process (–10).
Prepare failed, not any file was found
on this board (–11).
Prepare failed, insufficient Clip id
(–15).
Restore failed, Cannot find symbol
files on this tape (–18).
ERROR (–19). Bad register number.
Restore failed, file name already exist,
try to rename but unsuccessful (–20).
Cannot find the File Name Data,
please load the File Name Data first
(–21).
Set Time/Date
Error: Wrong Format.
Trim
The Start TC or Stop TC is not
properly set.
This file is locked.
This file is using for playback.
308
Error Messages
Description
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed in the above menu, directory renaming failed.
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if the
specified frame memory output channel cannot be used.
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if the
specified frame memory output channel is locked.
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if the
restore failed because a clip file cannot be deleted.
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if
there is not enough space to carry out the backup.
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if no
image is present.
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if
there are not enough Clip IDs (internal processing error).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if a
marker frame file was not found.
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if
Register Number is invalid (internal processing error)
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if
renaming failed.
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if the
file list was not loaded.
7317: Engineering Setup >System >Maintenance
In the above menu, an incorrect date and time was specified. Specify the
date and time correctly.
2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if neither
Start TC not Stop TC is set.
2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if the
interval between Start TC (or Clip Begin) and Stop TC (or Clip End) is the
entire clip.
2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if the
Start TC (or Clip Begin) value is greater than the Stop TC (or Clip End)
value.
2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if the file
is locked.
2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if the file
is being played back.