Time Settings; Setting The Keyframe Duration; Setting The Effect Duration; Delay Setting - Sony MVS-3000 System User Manual

Time Settings

You can determine the execution time of an effect by
setting either the keyframe duration or the effect duration
(1 p. 146).
You make these settings in the Flexi Pad.
For details about Flexi Pad operations,
Creation and Editing in the Flexi Pad" (p.

Setting the Keyframe Duration

1
Press the [EFF] button, then press the [EDIT ENBL]
button, turning it on.
2
Stop the effect on the keyframe for which you want to
set the duration.
The time from this keyframe to the following
keyframe is what you set.
3
Press the [KF DUR] button, turning it on.
The alphanumeric display shows "KF DUR" followed
by the duration of the current keyframe
(seconds:frames).
4
Use the numeric keypad to enter the desired timecode
value as a maximum of four digits.
For example, to set 9 seconds and 20 frames, enter
920.
You can also use the [TRIM] button to enter a
difference value (1 p.
5
Press the [ENTR] button to confirm the entry.
Notes
In addition to the above operation, the keyframe
duration may also be automatically changed as a result
of changing the effect duration.
For details, 1 "Time Settings" (p.

Setting the Effect Duration

1
Press the [EFF] button, then press the [EDIT ENBL]
button, turning it on.
2
Press the [EFF DUR] button, turning it on.
The alphanumeric display shows "DUR" followed by
the effect duration (minutes:seconds:frames).
1 "Keyframe
153).
153).
146).
3
Use the numeric keypad to enter the desired timecode
value as a maximum of six digits.
For example, to set 3 minutes 7 seconds and 15 frames,
enter 30715.
You can also use the [TRIM] button to enter a
difference value (1 p. 153)
4
Press the [ENTR] button.
Notes
In addition to the above operation, the effect duration
may also be changed as a result of inserting or deleting
keyframes.
For details, 1 "Time Settings" (p.

Delay Setting

1
Press the [EFF] button, then press the [EDIT ENBL]
button, turning it on.
2
Press the [DLY] button, turning it on.
The alphanumeric display shows "DELAY" followed
by the current delay (minutes:seconds:frames).
3
Use the numeric keypad to enter the desired timecode
value as a maximum of four digits.
You can also use the [TRIM] button to enter a
difference value (1 p. 153)
4
Press the [ENTR] button to confirm the entry.

Path Setting

The term "path" (1 p. 147)
how interpolation is carried out from one keyframe to the
next.
You set keyframe paths in the Key Frame >Path menu
(6113).

Basic Procedure for Path Settings

Selecting the category
From the buttons in the function button area, select the
category for which you want to make the setting.
1st row: Path settings for the switcher M/E-1 bank and
PGM/PST bank
2nd and 3rd rows: Path settings for User1 to User8
.
146).
.
refers to the specification of
Time Settings / Path Setting
159