Error Messages Shown In The Error Information Menu; Maintenance; Exchanging Button Labels - Sony MVS-3000 System User Manual

Icon Message
Warning
This operation will be cancelled,
because the register is locked.
Please change the register status to
be unlocked first.

Error Messages Shown in the Error Information Menu

If a file transfer related error occurs, the Error Information
menu appears to the following error messages.
Error message
[Error] Server Not Respond
[Error] No Space
If a message other than those above appears, store the data
or recall the data again. If the error message persists,
contact your Sony service representative.
Description
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store >Edit
In the above menus, an attempt was made to store to a register that is
locked. Unlock the register before carrying out the store.
Error description/measures
There is absolutely no response on the LAN from the processor.
Check your LAN connections and the power source of the processor.
There is insufficient space in the local disk or removable disk.

Maintenance

Exchanging Button Labels

A button top puller is supplied with the control panel.
After changing a pattern assigned to a numeric button, you
can use the following procedure to exchange the button
label.
1
Write the new pattern on one of the supplied exchange
labels.
2
Grip the holes on the button sides with the supplied
button top puller and remove the button.
3
Grip the slots on the sides of the white button cap with
the button top puller, so that the cap flexes slightly, and
remove the cap.
4
Remove the old label and insert the new label.
5
Replace the button cap.
6
Replace the button in its original location.
2
3
309
Maintenance