Sony MVS-3000 System User Manual page 306

Icon Message
Local Disk Format
Failure.
Local Disk device is busy.
In order to complete local disk format,
System needs to be restarted and
formatted again.
System will be restarted, then please
execute local disk format again.
Success!!
But some partitions cannot be created
because the capacity of the local disk
is not enough.
Password
Password Incorrect
Record
Cannot be executed.
Maximum number of clips are created.
Refresh Status
No external HDD was found (–2).
Cannot access the partition (–12).
Cannot access the directory (-20).
Cannot access the directory (-21).
The external HDD is busy (–22).
Rename
This operation is inhibited because of
the illegal combination in the selected
files.
Files currently used for playback
cannot be renamed.
No external HDD was found (–2).
Cannot access the directory (-20).
306
Error Messages
Description
7317: Engineering Setup >System >Maintenance
In the above menu, the local disk formatting procedure failed.
If the local disk is functioning correctly, or in some cases when there is
damage to the disk, it may not be possible to format the disk correctly in a
single attempt. In such cases, it is necessary to restart the system, and then
carry out formatting again.
Press [OK] to restart the system.
7317: Engineering Setup >System >Maintenance
In the above menu, the local disk formatting procedure completed
successfully.
However, because of insufficient local disk capacity, only the possible
number of partitions were created.
7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock
In the above menu, the wrong password was entered.
Enter the correct password.
2523: Frame Memory >Clip >Record
In the above menu, an attempt was made to execute [Rec Start] but the
number of recorded clips had already reached its upper limit.
2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menus, an attempt was made to execute [Refresh Status] but
the external HDD could not be recognized. Check that the external HDD is
correctly connected.
2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menus, an attempt was made to execute [Refresh Status] but
the logical drives of the external HDD could not be accessed. Check that the
external HDD is correctly formatted.
2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menus, an attempt was made to execute [Refresh Status] but
the directory of the external HDD could not be accessed.
2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menus, an attempt was made to execute [Refresh Status] but
the external HDD was busy and could not be accessed. Try again after you
check that the access lamp of the HDD or the indicator of the menu is
turned off.
7151.1: File >Frame Memory >Frame Memory >File Edit
In the above menu, this message appears if you select files of different
types and press [Rename].
Check that the selected files are all of the same type.
2546: Frame Memory >File >Rename
In the above menu, this message appears if [Rename] is pressed, when the
selected files include a movie (clip) currently being played back.
2546: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, when [Rename] is pressed, this message appears if the
external HDD cannot be found. Check that the external HDD is correctly
connected.
2546: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, when [Rename] is pressed, this message appears if an
external HDD directory could not be accessed.