Editing A Macro - Sony MVS-3000 System User Manual

Notes
While editing a macro, it is not possible to execute another
macro.
Creating a macro
To include all information associated with an
operation when registering a macro event
When registering an auto transition operation as an event,
you can register the auto transition event to include the
transition rate and background A/B bus selection status.
When registering an effect execution, rewind, or fast
forward as an event, you can also save the region to which
this applies.
Assign [UTIL/SBOX] to the 1st row in the cross-point
control block and the following functions to the 2nd row
beforehand.
For details about assignments,
Function to 1st Row Buttons" (p. 235)
a Function to 2nd Row Cross-Point Buttons" (p.
To use this capability, press the button assigned with
[UTIL/SBOX] in the 1st row, then press the button with
the assigned function to use in the 2nd row, turning it on.
Macro AT with Rate (Macro Auto Trans Event with/
without Rate): When registering an auto transition
macro event in the transition control block, include the
transition rate.
Macro AT with A/B Bus (Macro Auto Trans Event
with/without A/B Bus): When registering an auto
transition macro event in the transition control block,
include the background A/B bus cross-point.
Macro TL with Region (Macro Timeline with Region):
When registering an effect execution, rewind, or fast
forward as a macro event, save the affected region
together in the macro.
Events requiring adjustment when creating a
macro
The following events require time for execution to
complete, and therefore when executed within a macro
sequence, a pause event must be inserted to adjust the
timing.
• Rewinding effects involving external device control
• VTR/disk recorder/Extended VTR cue-up
For example, create a macro to cue up a VTR and then play
back as follows.
Macro event execution order:
Macro events:
1 "Assigning a Bus or
1 "Assigning
and
229).
Auto insert mode on/off setting
You can switch on or off the mode (auto insert mode) in
which at the same time that a control panel operation is
carried out, the event is automatically saved in a macro.

Editing a macro

You can carry out the following macro editing operations.
Event insertion
Insert the control panel operation as an event in a macro.
Event modification
Modify any event. You can modify all events within a
macro, or events within a specified range in a single
operation.
Event deletion
Delete any one event. You can delete all events within a
macro, or events within a specified range in a single
operation. You can then paste the deleted event using the
paste function.
Event copy
Copy any one event. You can copy all events within a
macro, or events within a specified range in a single
operation.
Event paste
Paste a copied or deleted event at a desired position within
a macro.
Undoing an edit operation
You can undo the last event insertion, modification,
deletion, or paste operation.
Macro merging
During macro editing, you can recall and copy another
register to merge it with the macro being edited.
For example, while editing macro register 2 you can recall
and copy register 1 to merge it as shown in the following
figure.
181
Macros