Polycom RealPresence 4000 Installation And Configuration Manual page 8

In the Fast Configuration Wizard - Routes dialog box, enter the IP
3
address of the default router.
Click Next.
4
Enter the required DNS information in the dialog box.
5
Field
MCU Host Name
DNS
Register Host
Names
Automatically to
DNS Server
Local Domain
Name
Primary DNS
Server IP Address
Click the Next button.
6
In the Fast Configuration Wizard - Environment dialog box, select the
7
IP Network Type: H.323, SIP or H.323 & SIP.
Click Next.
8
If you selected SIP only, go to Step 12.
9
8
Description
Enter the name of the MCU on the network.
Default name is RMX.
Select:
•
Off – if DNS servers are not used in the
network.
•
Specify – to enter the IP addresses of the DNS
servers.
Note: The IP address fields are enabled only if
Specify is selected.
Select this option to automatically register the
MCU Signaling Host and Shelf Management with
the DNS server.
Enter the name of the domain where the MCU is
installed.
The static IP addresses of the primary DNS server.