Polycom RealPresence 4000 Installation And Configuration Manual page 17

Flag
MCU Display Name
Terminate Conference
when Chairperson Exits
Auto Extend
Conferences
These flags can be modified later, if required, via the Setup menu's
System Configuration option. For more information, see the RMX
1500/2000/4000 Administrator's Guide, "System Configuration Flags".
36 Click Save & Close.
The RMX confirms successful configuration.
37 In the Success Message box, click OK.
38 In the Reset Confirmation dialog box, click Yes.
39 In the Please wait for system reset message box, click OK.
System restart may take up to 10 minutes.
40 Refresh the browser periodically until the Login screen is displayed.
41 When the Login screen is displayed, enter the new Username and
Password and click Login.
The Collaboration Server Web Client opens.
An MCU State indicator displays a progress indicator showing the
time remaining until the system start-up is complete.
When the default RMX User is replaced, the RMX Time is set and if
there are no System Errors, the green RDY LED on the CNTL unit
(on the RMX's front panel) turns ON and the ERR LED is OFF.
The speed and transmit/receive mode of the LAN ports are
automatically identified by the system. If the specific switch requires
it, modify these settings in the Ethernet Settings dialog box. For more
details, see the RealPresence Collaboration Server (RMX) 1500/
2000/4000 Administrator's Guide.
Value
The MCU name that appears at the endpoints.
Default: Polycom RMX 4000.
Yes/No (Default: Yes)
When Yes is selected (default) allows conferences
running on the RMX to be automatically extended
as long as there are participants connected and
there are available resources.
17