Selecting The Rmx Web Client Languages - Polycom RealPresence 4000 Installation And Configuration Manual

The Fast Configuration Wizard configures the Default IP Network
Service with common parameters. Advanced settings should be
performed once the initial configuration is complete. For detailed
description of the IP Network Services, see the RealPresence
Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide.

Selecting the RMX Web Client Languages

By default, the RMX Web Client interface is displayed only in English.
However, the system administrator can choose the languages available
for selection on the Login screen.
To customize the Multilingual Setting:
On the RMX menu, click Setup > Multilingual Setting.
1
The Multilingual Setting dialog box is displayed.
Place check marks in the boxes of the languages to be available for
2
selection.
Click OK.
3
Log out and Log in for the customization to take effect.
4
The RMX is shipped with one Entry Queue and four Meeting Rooms:
• Entry Queue DefaultEQ whose ID is 1000, and it is used to access
the default Meeting Rooms
• Four Meeting Rooms whose IDs are 1001, 1002, 1003 and 1004.
The default conferencing entities are set to CP conferencing at a line rate
of 384 kbps, Auto Layout, Polycom Skin and a duration of one hour.
The default Entry Queue (EQ) is set to Ad Hoc conferencing which
allows participants to start new conferences by entering a Conference or
Meeting Room ID that are not used for any other conferencing entities
defined or running on the MCU.
For IP conferencing, these conferencing entities can be used to start new
conferences without any additional settings.
If ISDN/PSTN endpoints are participating in the conferences a dial-in
number must be manually assigned to the conferencing entities.
18
Conferencing Entities