Polycom RealPresence 4000 Installation And Configuration Manual page 3

Write down the RMX's serial number that is on a sticker on the back
of the unit. It will be needed for product registration later in the
installation process.
Management Network Configuration on the USB
The system is shipped with the following default IP addresses:
• Control Unit IP address – 192.168.1.254
• Shelf Management IP Address – 192.168.1.252
• Control Unit subnet mask – 255.255.255.0
• Default Router IP Address – 192.168.1.1
When the RMX is installed for the first time, you must change the
default IP addresses to your local network settings. This can be done by
modifying the default settings in the LAN Configuration Utility on the
USB key shipped with the unit.
Insert the USB key provided with your system into the PC.
1
The Polycom Documentation window opens.
In Windows XP:
The Polycom Documentation option is automatically selected.
a
Click OK.
In Windows 7:
Select Open Folder to view files using Windows Explorer.
a
Double-click the index.hta file.
b
In the Language Menu window, select the documentation language.
2
In the License Agreement window, click the Accept Agreement
3
button.
In the Product Type window, select RMX 4000.
4
In the Initial Setup Utility, click the Lan Configuration Utility
5
hyperlink.
In the LanConfigUtility dialog box, modify the required network
6
parameters in the utility's dialog box using the information
supplied by your network administrator and click OK.
Key
3