Chassis Intrusion Connector; Front Audio Connector - DFI EC200 User Manual

Chassis Intrusion Connector

Chassis
Intrusion
2 1
The board supports the chassis intrusion detection function. Connect the chassis intrusion
sensor cable from the chassis to this connector. When the system's power is on and a chassis
intrusion occurred, an alarm will sound. When the system's power is off and a chassis intrusion
occurred, the alarm will sound only when the system restarts.
Chapter 5 Ports and Connectors
Chapter 5

Front Audio Connector

The front audio connector allows you to connect to the second line-out jack that is at the front
panel of your system.
Driver Installation
Install the audio driver. Refer to the chapter 8 for more information.
48
1 2
Front
Audio
Mic2-L GND
Mic2-R Presence Signal
Line2-R Mic2-JD
Front_IO_Sense Key
Line2-JD
Line2-L
9
10
www.dfi .com