Table of Contents
Advertisement
Chapter 2 - Hardware Installations
X Removing the Chassis Cover
Please read and follow the instructions below to open the system.
1. Make sure the system and all other peripheral devices connected to it have been
powered off.
2. Disconnect all power cords and cables.
Step 1:
The 2 screws on the bottom of the system are used to secure the bottom cover to the
chassis. Remove the screws and put them in a safe place for later use. Lift the bottom
cover upward to open the system.
Step 2:
The heat shield can be easily accessed after the chassis cover is removed.
User's Manual |EC70A-TGU
Chapter 2
HARDWARE INSTALLATION
10
Advertisement
Table of Contents
