Table of Contents
Advertisement
DVI Port
DVI Port
The DVI port is used to connect an LCD monitor. This port supports DVI-D signal only.
Connect the display device's cable to the DVI port. After plugging the cable connector into the
port, gently tighten the cable screws to hold the connector in place.
BIOS Setting
Configure the display devices in the Advanced menu ("Video Configuration" submenu) of the
BIOS. Refer to the chapter 7 for more information.
Driver Installation
Install the graphics driver. Refer to the chapter 8 for more information.
Chapter 5 Ports and Connectors
Chapter 5
RJ45 LAN Ports
Features
•
2 Intel
WGI210AT PCI Express Gigabit Ethernet controllers
®
The LAN ports allow the system board to connect to a local area network by means of a net-
work hub.
Driver Installation
Install the LAN drivers. Refer to the chapter 8 for more information.
41
LAN 1
LAN 2
LAN 1
LAN 2
www.dfi .com
Advertisement
Table of Contents
