DFI EC200 User Manual page 60

SATA Configuration
This section is designed to select the SATA controller and the type of hard disk drive which are
insalled in your system unit.
InsydeH20 Setup Utility
Advanced
SATA Controller
Chipset SATA Mode
SATA Speed
 Serial ATA Port 0
 [ST500DM002-1BD142]
 Serial ATA Port 1
 [Not Installed]
F1 Help ↑↓ Select Item F5/F6
Esc Exit ←→  Select Menu Enter
SATA Controller
Enable or disable the Serial ATA Port.
Chipset SATA Mode
Select the SATA mode. The item is fixed at the AHCI mode.
SATA Speed
Select the SATA speed: Gen 1 or Gen 2.
Chapter 7 BIOS Setup
Rev. 5.0
DISABLED: Disables
<Enabled>
SATA controller.
<AHCI>
ENABLED: Enables SATA
<Gen2>
conroller.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 7
Serial ATA Port 0
This field configures the function of the Serial ATA Port 0.
Advanced
Serial ATA Port 0 [ST500DM002-1BD142]
Security Mode: Uninstall
F1 Help ↑↓ Select Item
Esc Exit ←→  Select Menu
60
InsydeH20 Setup Utility Rev. 5.0
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com