Installing The Pci/Pcie Expansion Card - DFI EC200 User Manual

Installing the PCI/PCIe Expansion Card

PCI Expansion Card
1. The PCI slot and the PCIe x16 slot on the riser card are used to install the expansion
cards. To install the expansion cards, you need to remove the mounting screws that secure
the brackets to the chassis and then remove the brackets.
PCIe x16 slot
PCI slot
Chapter 3 Installing the Devices
Chapter 3
PCIe x16 Expansion Card PCIe x16 Expansion Card
(PCIe x1 signal)
Bracket
Mounting Screw
22
2. To remove the mounting screws and the brackets, you need to remove the hole plugs and
insert the screwdriver through the holes to access the mounting screws.
PCIe x16 slot
PCI slot
Bracket
Mounting Screw
Hole plug
www.dfi .com