Front View - DFI EC200 User Manual

Power LED
Indicates the power status of the system.
HDD LED
Indicates the status of the hard drive.
Alert LED
Indicates the status when the CPU is over temperature.
DC-in
Used to plug a power adapter.
COM Ports
Used to connect serial devices.
DVI Port
Used to connect a DVI device.
VGA Port
Used to connect an analog VGA monitor.
USB Ports
Used to connect USB 2.0 or 3.0 devices.
LAN Ports
Used to connect systems to a local area network.
GPIO
Supports 8-bit digital output and input.
Speaker-out
Used to connect to a speaker.
Reset Button
Indicates the reset status of the system.
Chapter 1 Introduction
Chapter 1
EC210-BT

Front View

Wi-Fi Module
Antenna Hole
USB
Wi-Fi Module Antenna Hole
Used to connect to a Wi-Fi antenna.
USB Ports
Used to connect USB 2.0/1.1 devices.
COM Ports
Used to connect serial devices.
HDD LED
Indicates the status of the hard drive.
Alert LED
Indicates the status when the CPU is over temperature.
Reset Button
Press to reset the system.
Power Button
Press to power-on or power-off the system.
10
Alert LED
COM 1~4 Power
Wi-Fi Module
Antenna Hole
HDD LED
Reset
www.dfi .com