DFI EC200 User Manual page 20

3. Place the SATA drive (with HDD brackets) into the system. Align the mounting holes on the
HDD brackets with the mounting holes on the heat-dissipating plate and then use the pro-
vided mounting screws to secure the drive in place.
Mounting screw
Chapter 3 Installing the Devices
Chapter 3
4. Connect A to the SATA data/power connector on the SATA drive, B and C to the SATA
power connector and the SATA data connector respectively on the system board.
Mounting hole
SATA data/power
connector (A)
HDD bracket
SATA data/power
20
SATA data/power connector (A)
SATA power connector (B)
SATA power connector
SATA data connector
connector
SATA power connector (B)
SATA data connector (C)
SATA data connector (C)
www.dfi .com