Rear Panel I/O Ports - DFI EC200 User Manual

Note:
1. When COM 1 RS232/422/485 is selected, JP23 and JP24 must be set in accordance
to JP15.
2. When COM 2 RS232/422/485 is selected, JP25 and JP26 must be set in accordance
to JP17.
3. When COM 3 RS232/422/485 is selected, JP27 and JP28 must be set in accordance
to JP19.
4. When COM 4 RS232/422/485 is selected, JP29 and JP30 must be set in accordance
to JP21.
5. To make the RS485 auto flow control function work on COM 1 to COM 4, please
set either 8 data bits + 1 stop bit or one of the following settings:
(1) 8 data bits + 1 parity bit + 1 stop bit
(2) 8 data bits + 1 parity bit + 2 stop bits
(3) 8 data bits + 2 stop bits
Chapter 5 Ports and Connectors
Chapter 5

Rear Panel I/O Ports

EC200-BT
Speaker-out
Reset LAN
DVI
(DVI-D signal)
Speaker-out
Reset
GPIO
Speaker-out
Reset LAN
36
Power
USB VGA COM6
COM5 DC-in
GPIO USB COM10 COM8
COM9 COM7
EC200-BTA881 Rear View
Power
LAN USB VGA COM6 COM5 DC-in
COM10 COM9 COM8 COM7 GPIO
EC200-BTAG60 Rear View
Power
USB VGA COM6 COM5 DC-in
EC200-BT6060 Rear View
HDD
Alert
HDD
Alert
HDD
Alert
www.dfi .com