DFI EC200 User Manual page 65

Boot
InsydeH20 Setup Utility
Main Advanced Security Power
Boot Type <Dual Boot Type>
Network Stack <Disabled>
PXE Boot Capability <Disabled>
USB Boot <Enabled>
Boot Menu Type <Advance>
 Boot Sequence
F1 Help ↑↓ Select Item F5/F6
Esc Exit ←→  Select Menu Enter
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI Boot
Type.
Network Stack
Network stack support:
Windows 8 BitLocker Unlock.
UEFI IPv4 PXE
Legacy PXE OpROM
USB Boot
Enable or disable the booting for USB boot devices.
Boot Menu Type
Normal
Based on the boot normal priority, it determines the EFI device first or the legacy
device first.
Advance
All boot devices follow the user's selection sequence.
Chapter 7 BIOS Setup
Rev. 5.0
Boot Exit
Select boot type to Dual
type, Legacy type or UEFI
type.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 7
Boot Sequence
This sequence is used when the system is powered up normally.
Boot Sequence
ST500DM002-1BD142
F1 Help ↑↓ Select Item
Esc Exit ←→  Select Menu
65
InsydeH20 Setup Utility Rev. 5.0
Boot
Set the system boot order.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com