Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DFI EC70A-TGU
Summary of Contents for DFI EC70A-TGU
- Page 1 EC70A-TGU Fanless Robust Embedded System User’s Manual © May 09, 2023 DFI Inc.
- Page 2 1. The changes or modifications not expressly approved by the party responsible for com- are the properties of the respective owners. pliance could void the user’s authority to operate the equipment. 2. Shielded interface cables must be used in order to comply with the emission limits. User's Manual |EC70A-TGU...
-
Page 3: Table Of Contents
Graphics Configuration ....................23 PCH-IO Configuration ....................24 PCH-IO Configuration► PCI Express Configuration ..........24 PCH-IO Configuration► SATA And RST Configuration ......... 25 PCH-IO Configuration► HD Audio Configuration ..........25 Security ..........................26 Secure Boot ........................26 Boot ............................27 Save & Exit ..........................27 User's Manual | EC70A-TGU... - Page 4 The manual is subject to change and update without notice, and may be based on editions that do not resemble your actual products. Please visit our website or contact our sales representa- • 1 EC70A-TGU system unit tives for the latest editions. •...
- Page 5 Make sure the system is placed or mounted correctly and stably to prevent the chance of dropping or falling may cause damage. • The openings on the system shall not be blocked and shall be kept in distance from User's Manual |EC70A-TGU...
-
Page 6: Chapter 1 - Introduction
HDD LED *Default COM 4 (RS232) USB 3.1 COM 3 (RS232*/8-bit DIO) COM 1 (RS232*/RS422/RS485) LAN 4 DC-in (9V ~36V) COM 2 (RS232*/RS422/RS485) HDMI 1 ~ 2 LAN 1 ~ 2 Antenna Hole LAN 3 Reset Button User's Manual |EC70A-TGU... -
Page 7: Dimensions
X LED Indication Status LED Suspend Mode LED Behavior Always ON Quick Blink (cycle 1 sec) Slow Blink (cycle>1 sec) S4, S5 HDD LED LED Behavior Status Blink Disk access activity HDD present or HDD not present User's Manual |EC70A-TGU... -
Page 8: Specifications
Indicators 1 x Power LED 1 x HDD LED Front I/O Serial 2 x RS-232/422/485 (DB-9, COM 1~2) 1 x RS232 (DB9, COM 4) Display 1 x VGA Buttons 1 x Power button 1 x Reset button User's Manual |EC70A-TGU... - Page 9 TIONS Vibration Operating: IEC 60068-2-64 Test Fh: Vibration Board-Band Random Test Random, 1Grms @ 5~500 Hz, 30min Non-Operating: IEC 60068-2-6 Test Fc: Vibration Sinusoidal Test Sweep Sine, 3Grms @ 10~500Hz, 30min Certifications CE, FCC Class A, RoHS User's Manual |EC70A-TGU...
-
Page 10: Chapter 2 - Hardware Installations
Remove the screws and put them in a safe place for later use. Lift the bottom cover upward to open the system. Step 2: The heat shield can be easily accessed after the chassis cover is removed. User's Manual |EC70A-TGU... -
Page 11: Installing The So-Dimm Module
The clips snap automatically and abruptly to the retention notches of the card sounding a distinc- tive click, and lock the card in place. Inspect that the clip sits in the notch. If not, please pull the clips outward, release and remove the card, and mount it again. Step 4 User's Manual |EC70A-TGU... -
Page 12: Com3 Jumper Setting
Heat shield RS422 Assignment Assignment RS232 RS485 (Full Duplex) Pin1 DATA+ DIOA0 Pin2 DATA- DIOA1 RS232 (default) Pin3 DIOA2 10-11 11-12 Pin4 DIOA3 Pin5 Pin6 DIOA4 Assignment Assignment Pin7 DIOA5 Pin8 DIOA6 Pin9 DIOA7 RS232 (default) 10-11 11-12 User's Manual |EC70A-TGU... -
Page 13: Chapter 3 - Bios Settings
To update the BIOS, you will need the new BIOS file and a flash utility. Please contact technical support or your sales representative for the files and specific instructions about how to update BIOS with the flash utility. User's Manual |EC70A-TGU... -
Page 14: Main
The time format is <hour>, <minute>, <second>. The time is based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. Hour displays hours from 00 to 23. Minute displays min- utes from 00 to 59. Second displays seconds from 00 to 59. User's Manual |EC70A-TGU... -
Page 15: Cpu Configuration
Hyper-threading Enables this field for Windows XP and Linux which are optimized for Hyper-Threading technol- ogy. Select disabled for other OSes not optimized for Hyper-Threading technology. When dis- abled, only one thread per enabled core is enabled. User's Manual |EC70A-TGU... -
Page 16: Power & Performance ► Cpu- Power Management Control
Enable or disable CPU Power Management. It allows CPU to enter "C states" when it’s idle and ME Unconfig on RTC Clear nothing is executing. When disabled, ME will not be unconfigured on RTC Clear. Note: The sub-menus are detailed in following sections. User's Manual |EC70A-TGU... -
Page 17: Trusted Computing
Set SuperIO WatchDog Timer Timeout value. The range is from 0 (disabled) to 255. To clear the existing TPM encryption, select "TPM Clear" and restart the system. This field is not available when "Security Device Support" is disabled. Note: The sub-menus are detailed in following sections. User's Manual |EC70A-TGU... -
Page 18: Nct6126D Hw Monitor
SYS Smart Fan/CPU Smart Fan Control = [Disabled] • Fix Fan Speed Count Set the fan speed, the value ranging from 1-100%, 100% being full speed. The fans will always operate at the specified speed regardless of gauged temperatures. User's Manual |EC70A-TGU... -
Page 19: Serial Port Console Redirection
Select parity bits: None, Even, Odd, Mark or Space. Stop Bits Select stop bits: 1 bit or 2 bits. Flow Control Select flow control type: None or Hardware RTS/CTS. Flow Control is for RS485 mode and is only supported by Serial Port 1 (COM1). User's Manual |EC70A-TGU... -
Page 20: Acpi Settings
The system automatically powers on after power failure. • S5 State The system enter soft-off state after power failure. Power-on signal input is required to power up the system. • Last State The system returns to the last state right before power failure. User's Manual |EC70A-TGU... -
Page 21: Usb Configuration
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric keys to set the value. Media detect count Set the number of times the presence of media will be checked. Use either +/- or numeric keys to set the value. User's Manual |EC70A-TGU... -
Page 22: Csm Configuration
This field controls the execution of UEFI and Legacy Storage OpROM. Video This field controls the execution of UEFI and Legacy Video OpROM. Other PCI devices This field determines OpROM execution policy for devices other than Network, Storage or Video. User's Manual |EC70A-TGU... -
Page 23: Chipset
2048MB aperture. To use this feature, please disable CSM Support. DVMT Pre-Allocated Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory Size used by the Internal Graphics Device. DVMT Total Gfx Mem Select DVMT 5.0 Total Graphic Memory Size used by the Internal Graphics Device. User's Manual |EC70A-TGU... -
Page 24: Pch-Io Configuration
SATA Device Otpions Settings Select PCIe Speed of the current port — AUTO, Gen1, Gen 2, or Gen3. This field may not appear HD Audio Configuration when the speed of the port is not configurable. HD Audio Subsystem Configuration Settings User's Manual |EC70A-TGU... -
Page 25: Pch-Io Configuration► Sata And Rst Configuration
This option allows you to create RAID or Intel Rapid Storage configuration along with Intel® Optane™ system acceleration on Serial ATA devices. Ports and Hot Plug Enable or disable the Serial ATA port and its hot plug function. User's Manual |EC70A-TGU... -
Page 26: Security
Secure Boot. Press Enter and a prompt will show up for you to confirm. Reset To Setup Mode Clear the database from the NVRAM, including all the keys and signatures installed in the Key Management menu. Press Enter and a prompt will show up for you to confirm. User's Manual |EC70A-TGU... -
Page 27: Boot
• Restore Setting from file This field will appear only when a USB flash device is detected. Select tion. Refer to the Advanced > CSM Configuration submenu for more information. this field to restore set-ting from the USB flash device. User's Manual |EC70A-TGU...