Chapter 3 - Installing The Devices; Removing The Chassis Cover - DFI EC200 User Manual

Chapter 3 - Installing the Devices

Removing the Chassis Cover

1. Make sure that the system and all other peripheral devices connected to it have been
powered-off.
2. Disconnect all power cords and cables.
3. The 6 mounting screws on the bottom side of the system are used to secure the cover to
the chassis. Remove these screws and then put them in a safe place for later use.
4. After removing the mounting screws, lift the cover up.
Lift the Cover Upward
Chapter 3 Installing the Devices
Chapter 3
5. The SODIMM socket and the Mini PCie slot are readily accessible after removing the chassis
cover.
SODIMM socket
Mounting Screw
17
Mini PCIe slot
www.dfi .com