Instrument And Control Functions; Handlebar Switch; Speed Limiter And Power Reduction Plate - Yamaha PW50 2021 Owner's Manual

Handlebar switch

1. Engine stop switch "OFF/RUN/START"
Engine stop switch
"OFF/RUN/START"
Set this switch to "START" before
starting the engine. Set this switch to
"RUN" after warming up the engine or
before starting off. Set this switch to
"OFF" to stop the engine.
TIP
 The engine cannot be started with
this switch set to the "RUN" posi-
tion.
 The engine speed is limited while
this switch is set to the "START"
position, therefore the motorcycle
cannot be ridden in that switch
position.

Instrument and control functions

EAU40661
Speed limiter and power re-
duction plate
Your motorcycle is equipped with an
1
adjustable speed limiter and a power
reduction plate. The speed limiter
keeps the throttle from fully opening,
even when the throttle grip is turned to
the maximum. The power reduction
plate is installed in the exhaust mani-
fold to limit the amount of power avail-
able while learning.
Speed limiter
EAU40675
1. Locknut
2. Adjusting screw
4-1
1. Loosen the locknut.
2. To increase the maximum engine
power available and the maximum
speed of the motorcycle, turn the
adjusting screw in direction (a). To
decrease the maximum engine
power available and the maximum
speed of the motorcycle, turn the
adjusting screw in direction (b).
(a)
3. Tighten the locknut.
EAU41045
1
2
(b)
4