Table of Contents
Advertisement
Transition Setup window
Setting
Value
Selects the transition effect.
You can also press the [MIX] or [WIPE] button to select the transition effect.
Transition
MIX
WIPE
Wipe
Wipe Preset
(icon display)
–
SETUP
0.0–2.0
Time (sec)
Lit
Auto Transition
Video Wipe Setup screen
Setting
Value
Wipe 1–4
Horizontal, Vertical,
Horizontal Open,
Vertical Open, Upper Left,
Pattern
Upper Right, Lower Left,
Lower Right, Box, FAM, NAM
Normal, Reverse, N/R
Direction
Linear, Slow, Fast, S Curve
Curve
Adjusts the wipe start position.
Position
-100.0–0–+100.0
Horizontal (%)
-100.0–0–+100.0
Vertical (%)
Aspect Ratio
1:1, 3:2, 4:3, 5:4, 16:9
Aspect Ratio
Horizontal (%) -100.0–0–+100.0
Correction
Vertical (%)
-100.0–0–+100.0
Border
Configures the border added to the edge of the wipe area.
Switch
Disabled, Enabled
Width
0–40
Color
Specifies the color of the edge.
Hue (deg.)
0–359
Saturation
0–50–100
Value
0–50–100
Picker
–
[HOME] button
Explanation
(bold text: default value)
The two videos are mixed as the transition occurs.
The next video moves across to replace the original video.
Selects the preset for the wipe effect.
1–Wipe 4
* You can edit the preset settings.
Displays the Video Wipe Setup screen (p. 41).
Specifies the video transition time.
This can also be set by the [TIME] knob.
Turns the auto transition function on/off.
You can also press the [AUTO TRANSITION] button to turn this on/off.
(on), unlit (off )
Auto-transition is a function that automatically switches between scenes when you select the
preset scene (the next scene to be output).
[HOME] button
Explanation
(bold text: default value)
Specifies the wipe pattern.
Default settings are as follows.
Wipe 1: Horizontal
Wipe 2: Vertical
Specifies the direction of wipe.
Sets the curve used for changing the speed of the wipe motion.
Adjusts the horizontal position.
Adjusts the vertical position.
Sets the aspect ratio of the wipe pattern.
Adjusts the aspect ratio (horizontal) of the wipe pattern.
Adjusts the aspect ratio (vertical) of the wipe pattern.
Sets whether to show or hide the border.
Adjusts the width of the border.
Adjusts the hue.
Adjusts the saturation.
Adjusts the color brightness or luminosity.
Shows the color picker window. You can use the color picker to select the color of the window
border. The data for the color you selected is reflected in the "Hue (deg.)", "Saturation" and "Value".
Ó
transition effect area on multi-view screen
Ó
transition effect area on multi-view screen
Wipe 3: Horizontal Open
Wipe 4: Vertical Open
Parameter list
Ó
<SETUP> in Transition Setup window
41
Advertisement
Table of Contents
