Safety Vision Observer 4000 User Manual page 35

OBSERVER 4000 USER GUIDE
33
Low Voltage Protection
The Low Voltage Protection menu
controls the voltage threshold before
the DVR shuts down automatically to
protect itself.
Use the remote control to configure
the following:
ENABLE: Select ON to enable voltage
protection.
LOW VOLTAGE: Enter the minimum
voltage, in volts, that the DVR can
receive before it automatically
disconnects from the CMS or shuts
down.
VOLTAGE OF START: Enter the voltage,
in volts, that the vehicle typically
drops to during startup (the ignition
key is turned).
INTERNAL TIME FOR CMS: This option
is not supported by the Observer 4000.