Safety Vision Observer 4000 User Manual page 26

OBSERVER 4000 USER GUIDE
24
Camera Settings
The Camera Setting menu controls
which cameras are recorded and
displayed in the live view.
Select the following for each camera:
ENABLE: Select ON to enable
recording of this camera.
NAME: Enter an optional alphanumeric
name for each specific camera.
AUDIO: Select ON to enable audio
recording for this camera.
LIVE: Select ON to display this camera
in the live view.
ENCODE: Select CBR for constant bit
rate (keeps camera bit rate constant
regardless of motion, but less efficent
in using storage space) or VBR for
variable bit rate (varies bit rate
depending on motion for for efficent
storage usage).
CYCLE: Select ON to display the cameras in a loop (the
cameras display in succession in full screen mode).
CYCLE TIME: Enter the amount of time (between 5 and 300
seconds) to display each camera before advancing to the
next one.
LIVE AUDIO: Select ON to enable audio to play during the
Live View.