B Appendix B - Accessories For Specific Measurements - METREL MI 3122 Instruction Manual

MI 3122 Smartec Z Line-Loop / RCD
B Appendix B - Accessories for specific
measurements
The table below presents standard and optional accessories required for specific
measurement. The accessories marked as optional may also be standard ones in some
sets. Please see attached list of standard accessories for your set or contact your
distributor for further information.
Function
Line impedance
Fault loop impedance
RCD testing
Phase sequence
Voltage, frequency
Suitable accessories (Optional with ordering code A....)
Universal test cable

Plug commander (A 1272)

Mains measuring cable

Tip commander (A 1270)

Three-phase adapter (A 1111)

Universal test cable

Plug commander (A 1272)

Mains measuring cable

Tip commander (A 1270)

Three-phase adapter (A 1111)

Universal test cable

Plug commander (A 1272)

Mains measuring cable

Three-phase adapter (A 1111)

Universal test cable

Three-phase cable (A 1110)

Three-phase adapter (A 1111)

Universal test cable

Plug commander (A 1272)

Mains measuring cable

Tip commander (A 1272)

56
Appendix B – Accessories