Memory; Date And Time; Rcd Standard - METREL MI 3122 Instruction Manual

MI 3122 Smartec Z Line-Loop / RCD

4.2.3 Memory

In this menu the stored data can be recalled and
deleted. See chapter 6 Data handling for more
information.
Keys:
UP / DOWN
TEST
Function selectors Exits back to main function menu.

4.2.4 Date and time

Selecting this option will allow the user to set the
date and time of the unit.
Keys:
TAB
UP / DOWN
TEST
Function selectors Exits back to main function menu.
Warning:
If the batteries are removed for more than 1 minute the set time and date will be

lost.

4.2.5 RCD standard

RCD normative reference can be selected
by this option.
Keys:
UP / DOWN
TEST
Function selectors
Selects option.
Enters selected option.
Selects the field to be changed.
Modifies selected field.
Confirms new setup and exits.
Selects standard.
Confirms selected standard.
Exits back to main function menu.
Figure 4.4: Memory options
Figure 4.5: Setting date and time
Figure 4.6: Selection of RCD test standard
21
Settings