Standards Applied - METREL MI 3122 Instruction Manual

MI 3122 Smartec Z Line-Loop / RCD

2.3 Standards applied

The MI 3122 Smartec Z Line-Loop / RCD instrument is manufactured and tested according
to the following regulations, listed below.
Electromagnetic compatibility (EMC)
IEC/ EN 61326-1
IEC/EN 61326-2-2 Electrical equipment for measurement, control and laboratory use -
Safety (LVD)
IEC/ EN 61010 - 1
IEC/ EN 61010 - 031
Functionality
IEC/ EN 61557 Electrical safety in low voltage distribution systems up to 1000 V a.c. and
1500 V d.c. - Equipment for testing, measuring or monitoring of
protective measures
Part 1
Part 3
Part 6
Part 7
Part 10
Other reference standards for testing RCDs
IEC/ EN 61008
IEC/ EN 61009
IEC/ EN 60755
IEC 60364-4-41
BS 7671
AS / NZ 3760
Electrical equipment for measurement, control and laboratory use -
EMC requirements -- Part 1: General requirements
Class B (Hand held equipment used in controlled EM environments)
EMC requirements -- Part 2-2: Particular requirements - Test
configurations, operational conditions and performance criteria for
portable test, measuring and monitoring equipment used in low-
voltage distribution systems
Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 1: General requirements
Safety requirements for hand-held probe assemblies for electrical
measurement and test
General requirements
Loop resistance
Residual current devices (RCDs) in TT and TN systems
Phase sequence
Combined measuring equipment
Residual current
overcurrent protection for household and similar uses
Residual current operated circuit-breakers with integral overcurrent
protection for household and similar uses
General requirements for residual current operated protective
devices
Electrical installations of buildings - Part 4-41: Protection for safety
- Protection against electric shock
IEE Wiring Regulations
In-service safety inspection and testing of electrical equipment
operated circuit-breakers
10
Standards applied
without integral