MI 3122 Smartec Z Line-Loop / RCD
6 Data handling
6.1 Memory organization
Measurement results together with all relevant parameters can be stored in the
instrument's memory.
6.2 Data structure
The instrument's memory place is divided into 3 levels each containing 199 locations. The
number of measurements that can be stored into one location is not limited.
The data structure field describes the identity of the measurement (which object, block,
fuse) and where can be accessed.
In the measurement field there is information about type and number of measurements
that belong to the selected structure element (object and block and fuse).
This organization helps to handle with data in a simple and effective manner.
The main advantages of this system are:
Test results can be organized and grouped in a structured manner that reflects the
structure of typical electrical installations.
Simple browsing through structures and results.
Test reports can be created with no or little modifications after downloading results
to a PC.
Data structure field
Figure 6.1: Data structure and measurement fields
Memory operation menu
Data structure field
Root level in the structure:
OBJECT: 1
001: No. of selected object.
Sub-level (level 2) in the structure:
BLOCK: 2
001: No. of selected system.
Sub-level (level 3) in the structure:
FUSE: 3
001: No. of selected element.
st
level location name.
nd
level location name.
rd
level location name.
38
Memory organization