Changing From Flat Spray Nozzle To Round Spray Nozzle - WAGNER PEM-X1 Original Operating Manual

VERSION 09/2012
OPERATING MANUAL
8.8

CHANGING FROM FLAT SPRAY NOZZLE TO ROUND SPRAY NOZZLE

The standard Corona spray gun is delivered with a fl at spray nozzle. The nozzle can be
changed easily, as described below.
The X1 R electrode holder is necessary to perform the change.
Electrode tip!
Risk of injury.
1.
2.
4.
ORDER NUMBER DOC 2326020
CAUTION
Take care when fi tting the X1 R electrode holder.
Procedure:
1. Unscrew cap nut from the gun housing.
2. Take cap nut with nozzle system off gun body. The nozzle
Note:
If the nozzle system doesn't remain inserted in the cap nut, the
nozzle system and cap nut must be replaced.
3. The parts can be separated by gently pressing the sliding
4. Attach defl ector cone sleeve to X1 R electrode holder.
3.
P_01679
system remains inserted in the cap nut.
ring on the fl at spray nozzle.
PEM-X1
44