Spray Process With Flat Jet Nozzle - WAGNER GA 5000EAC Operating Manual

Operating manual GA 5000EAC Electrostatic Automatic Spray Gun (AirCoat)
5 Description
1 Nozzle nut
2 Spray jet
3 Multi-channel swirl nozzle
Advantages
– Large application volume
– Low fogging tendency
– Good finish
– High-viscosity products can easily be processed
– Long service life of the nozzles
– Spray jet width adjustment
5.6.2 Spray process with Flat Jet Nozzle
In the AirCoat process, the spray product is atomized under a pressure of 3-15 MPa;
30-150 bar; 435-2176 psi. With the help of the AirCoat air, with a pressure of 0-0.25 MPa;
0-2.5 bar; 0-36 psi, a soft, flat spray jet is produced which largely eliminates the problem of
overlapping in the peripheral zones. With shaping air, there is the possibility of reducing the
width of the spray jet.
4
1 Shaping air
2 Air cap
Advantages
– Large application volume
Order number 2360922 | Edition 09/2022
4
5
4
B_00023
3
1
3
3
4
1
4 AirCoat air
5 Spray product
2
B_00020
Atomizing air
Variable spray jet width
2
27