VERSION 06/2013
OPERATING MANUAL
7.6
REPLACING NOZZLE INSERT OF ROUND JET NOZZLE
1. Relieve the pressure of gun and device.
2. Secure gun (remove the control air hose).
3. Remove nozzle insert (B) with nozzle spanner (A).
4. Fit new nozzle insert in reverse order (see chapter 9.4).
Note:
Flush out clogged round jet nozzle:
1. Use nozzle spanner (A) to loosen nozzle insert (B) by a
half turn.
2. Remove nozzle spanner and switch on the gun briefl y.
3. After fl ushing the nozzle, re-tighten the nozzle insert.
ORDER NUMBER DOC 2312956
B
A
B_03055
37