Replacing The Spray Gun - WAGNER PEM-X1 Original Operating Manual

VERSION 09/2012
OPERATING MANUAL
8.2.4

REPLACING THE SPRAY GUN

Before replacing the spray gun any powder residue must be thoroughly removed.
The wear parts in the spray gun, marked in the spare parts list with " ", must be regularly
checked and, if necessary replaced.
Procedure:
1. Switch off control unit.
2. Disconnect electrical cable 1 from control unit 2.
3. Disconnect the hoses for powder feed 3 and atomizing air 4 from the spray gun 5.
4. Connect the hoses for powder feed 3 and atomizing air 4 to the new spray gun 5.
5. Connect electrical cable 1 to control unit 2.
6. Switch on control unit.
7. The spray gun is ready for use again.
ORDER NUMBER DOC 2326020
4
3
1
2
P_01672
PEM-X1
5
37