Processing Materials - WAGNER PEM-X1 Original Operating Manual

VERSION 09/2012
OPERATING MANUAL
2.5

PROCESSING MATERIALS

Types of powder which can be charged electrostatically
Metallic powder
2.6
REASONABLY FORESEEABLE MISUSE
The following is prohibited:
Coating work pieces which are not grounded
Unauthorized conversions and modifi cations to spray guns
Processing liquid or similar coating materials
Using defective components, spare parts or accessories other than those described
in chapter 12 of this operating manual.
The forms of misuse listed below may result in health issues and/or damage to property:
Use of damp powder paint
Incorrectly set values for powder discharge
Incorrectly set electrostatic values
Use of defective components and accessories
Use for foodstuff s
Use in the pharmaceutical sector
Use with not permissible control units
2.7
RESIDUAL RISKS
Residual risks are risks which cannot be excluded even in the event of correct use.
If necessary, warning and prohibition signs at the relevant points of risk indicate residual
risks.
Residual risk Source
Skin contact with Handling powder
powder paints and paints and cleaning
cleaning agents agents
Powder paint in air Painting outside
outside the defi ned the defi ned
working area working area
ORDER NUMBER DOC 2326020
Consequences
Skin irritation,
allergies
Inhalation of
substances
hazardous to health
Specifi c measures Lifecycle phase
Wear protective Operation,
clothing
Note safety data maintenance,
sheets
disassembly
Observe working Operation,
and operating
maintenance
instructions
PEM-X1
9