Fitting The Flat Spray Nozzle - WAGNER PEM-X1 Original Operating Manual

VERSION 09/2012
OPERATING MANUAL
8.4

FITTING THE FLAT SPRAY NOZZLE

2.
3.
4.
ORDER NUMBER DOC 2326020
Procedure:
Note:
1. Before inserting the electrode holder, the spring
contact of the gun body and contact surface of the
electrode holder should be checked. The spring
contact must be clean and smooth-running, the gun
body must also be clean and free of powder deposits.
2. Insert electrode holder into gun housing.
3. Attach fl at spray nozzle to electrode holder and attach
cap nut.
P_01674
4. Screw cap nut onto gun housing until fl at spray nozzle
can no longer be turned by hand.
PEM-X1
39