Table of Contents
Advertisement
...and then cable TV channels.
Tip: Cable TV channels are channels from a cable TV provider that you can receive by connecting their
cable directly to your TV (unscrambled NTSC, ATSC, and QAM channels, if you're the kind of person who is
interested in the details). In many cases, your cable provider probably requires you to use their set-top box
and connect it to a different input, and then use the set- top box to tune your cable stations. In that case,
you can skip scanning for cable channels.
7. When the channel scans finish, the TV shows the number of channels it added.
Scanning for channels can take several minutes.
Tip: Repeat the channel scan from time to time to make sure you are receiving all of the latest channels.
Broadcasters add and remove channels, move channels to different parts of the spectrum, and change the
power levels of their channels periodically.
Note: You'll have to repeat the channel scan if you remove the Antenna TV tile from the Home screen or
perform a factory reset. To repeat the channel scan at any time, go to Settings > TV inputs > Antenna TV
> Set up input. Your antenna reception and picture quality depend on the position of your antenna and on
your location relative to the antennas of broadcasters in your area.
Now, you're ready to watch broadcast TV! While you're watching, try the following:
•
Press
or
•
Press
to display the channel list and then use
•
Or press
to change channels.
or
o jump through the channel list a page at a time.
and
to select a channel to watch.
30
Hide quick links:
Advertisement
Table of Contents
