Haier HL32XSL2 Owner's Manual

Led hdtv
Hide thumbs Also See for HL32XSL2:


Quick Links

Please READ this manual carefully before
operating your TV, and retain it for future


Table of Contents

Summary of Contents for Haier HL32XSL2

  • Page 1 0090509595 OWNER’S MANUAL HL40XSL2/HL40XSLW2/ HL46XSL2/HL46XSLW2/ HL32XSL2/HL32XSLW2 LED HDTV Please READ this manual carefully before operating your TV, and retain it for future reference.
  • Page 2: Warning

    The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use. EN-1 Haier LED HDTV The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of...
  • Page 3: Fcc Statement

    *Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. *Consult the dealer or an experienced radio/TV technician for help. This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may be not cause harmful interference.
  • Page 4: Safety Instructions

    SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
  • Page 5: Table Of Contents

    USB Input ...25 To play pictures ... 26 To play music ... 26 To play video ... 27 Universal Remote Control Setting Up Your Remote Control ...28 Remote Control Codes ...29 Maintenance Specification Troubleshooting Warranty Contents Haier LED HDTV EN-4...
  • Page 6: Introduction

    Introduction Introduction Controls This is a simplified representation of the TV front panel, side panel control buttons and side inputs. TV Side panel controls and connections Menu display. Press to access the on-screen 1 MENU menu display. Press to access the input source mode. Press...
  • Page 7: Connection Options

    Connect various types of digital audio equipment. Note In standby mode, these ports will not work. Connect cable or antenna signals to the TV, either directly or through your cable box. Headphone audio output terminal. Connect a USB flash drive to view MPEG2 videos, JPEG images or listen to MP3 songs.
  • Page 8: Universal Remote Control

    Introduction Universal Remote control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote sensor on the TV. Function introduction EN-7 Haier LED HDTV 1 POWER Press to turn on and off the TV.
  • Page 9: Installation

    Installation External Equipment Connections Accessories Remote control Antenna Connection Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket RF Coaxial Wire (75 ohm) VHF Antenna...
  • Page 10: Choose Your Connection

    Component Setup How to connect Connect the DVD video outputs (COMPONENT) to the Y Pb Pr jacks on the TV and connect the DVD audio PLAY on outputs to the YPbPr Audio IN jacks on the TV, as shown in the figure.
  • Page 11: Connecting A Dtv (Digital Tv)

    Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
  • Page 12: Hdmi And Dvi Input

    Turn on the computer and the TV. Use INPUT on the remote control to select VGA or HDMI source. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA mode. If noise...
  • Page 13: Connecting Headphones

    Select Main source menu. Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Back of TV Plug a set of headphones into the 3.5 mm mini-jack...
  • Page 14: Operation

    Operation Operation In the manual, the OSD (on screen display) may be different from your TV’s, because it is just an example to help you with the TV operation. There are several options you might need to set up in order for your TV to work properly.
  • Page 15: Channel Skip

    To cancel searching, press EXIT button. Note Antenna is selected, the TV will detect When antenna signals and will search for antenna TV (NTSC and ATSC) channels available in your local area. Cable is selected, the TV will detect cable When...
  • Page 16: Select The Desired Program

    Select the desired sound Press VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.
  • Page 17: How To Customize Your Own Picture Status

    / ENTER button and then use / ENTER button and then use / ENTER button and then use Effect Video Demo Partition Left Demo Audio Channel Function Lock Select EXIT Back MJC Demo 120HZ FULL MOTION Haier LED HDTV EN-16...
  • Page 18: Pc Set

    Color Temperature Advanced Video Function Lock Video ENTER / ENTER button and then use Press to select PC. EN-17 Haier LED HDTV Audio menu How to select audio mode button to Custom Adjust Select EXIT Back button How to Customize your own audio...
  • Page 19: Sap Broadcasts Setup

    Press / ENTER button to confirm, the following display will appear on the screen. to select OK, then press OK to confirm. The TV screen Press will be black and no picture , but the sound is still normal. You can press POWER button to reveal the picture on the screen.
  • Page 20: Osd Transparency

    Low, Middle or High. Screen Mode Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. Note If a fixed image is displayed on the screen for a long time, the image may become permanently burned on the screen and remain visible.
  • Page 21: Close Caption

    Close Caption This allows you to modify how digital captions are displayed on your TV. Select from the following options to change the visual characteristics of your TV’s digital captioning. Customize the DTV/CADTV captions that appear on your screen.
  • Page 22: Lock Menu

    A password is required to gain access to this menu. MENU button and then use Press select Lock menu. Then, press • The TV is set up with the initial password “0-0-0-0” and security default password is 9-4-4-3. button to button.
  • Page 23: Channel Block

    Select EXIT Back Note The V-chip will automatically block certain categories that are “More restrictive” . For example, if you block “ ” sub-rating in TV-PG, then the “ ” Video Parental Lock Parental Guide Audio MPAA Rating CA Eng Rating...
  • Page 24 You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. button to select MPAA Rating item.
  • Page 25: Other Functions

    C: Program show time Quick program view Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that was selected. Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure).
  • Page 26: Usb Input

    Text 4). CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. TEXT The term for the words that appear in a large black frame and almost cover the entire screen;...
  • Page 27: To Play Pictures

    Operation Duration Effect Information 1. Play previous picture STOP 2. Play next picture PREV NEXT to select to select button to select folder or file, and 4. Shuffle On or Off 5. Audio Only 6. Information Haier LED HDTV EN-26...
  • Page 28: To Play Video

    EXIT button to return to the previous menu. Press Press USB button to exit the USB mode. Note Do not remove USB device from the TV until you have exited the USB mode otherwise you may damage the USB device. Picture Mode...
  • Page 29: Universal Remote Control

    Device LED will blink if user presses any key (if the key has data in current mode.). If the key has no data, then LED will not blink. Default init status: TV/Haier codeset. Manually Programming the Control Check the code no. from the code list.
  • Page 30: Remote Control Codes

    Fast Programming Haier default TV codeset Press and holding the ENTER key and then press POWER key for 3 seconds, the LED will blink 3 times and turn off, default Haier codeset (001) will be programmed to the control. Remote Control Codes NO.
  • Page 31 055 059 060 061 062 063 065 071 181 320 331 349 350 181 Philips 040 041 042 043 044 045 046 055 059 060 063 065 071 089 090 091 096 160 162 164 169 174 177 179 190 208 291 320 347 351 Haier LED HDTV EN-30...
  • Page 32 017 018 019 020 074 075 099 100 104 106 109 111 113 115 120 123 146 151 173 227 354 258 Totevision 076 352 259 Trutech EN-31 Haier LED HDTV NO. Brand Code 260 Tuntex 333 362 261 TVS...
  • Page 33 Fisher 028 073 Fuji Funai 008 020 032 105 116 Garrard 008 032 Gateway 012 029 031 055 119 Go Video 012 072 Goldstar 016 030 106 112 120 Gradiente 008 032 Harley Davidson Harman/Kardon Headquarter Haier LED HDTV EN-32...
  • Page 34 Sanyo 012 028 029 073 119 Scott 010 018 Sears 008 013 028 030 031 112 120 Sharp 022 023 052 090 096 EN-33 Haier LED HDTV NO. Brand Code Shogun 012 029 Singer Sonic Blue 109 127 Sony 004 005 006 007 008 033 036 038 039 046 064 065 066 075 111 123 131 135...
  • Page 35 AudioSource Audiotronic Audiovox 190 214 220 332 B & K 213 236 Bang & Olufsen Bel Canto Design Biamp BOSE 071 088 285 Boston Acoustics California Audio Labs Cambridge Sound Works 241 Capetronic Carver 318 322 Haier LED HDTV EN-34...
  • Page 36: Maintenance

    Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen...
  • Page 37: Specification

    If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. Specification Product Specification 32" 40" 46"...
  • Page 38: Warranty

    Haier be liable, or in any way responsible for incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.
  • Page 39 Warranty Haier LED HDTV EN-38...

This manual is also suitable for:


Table of Contents